Products

HJ89 Series Grip Multi-axis Operation Joystick

Product Features • Heavy-duty industrial handles, supporting excavating machinery and equipment; • Non-contact Hall sensor detection method; • Spring return operation mode; • There are many different types of grips for selection; • Optional CAN bus output. Application This series of products are...

Send Inquiry

Description

Product Features

• Heavy-duty industrial handles, supporting excavating machinery and equipment;

• Non-contact Hall sensor detection method;

• Spring return operation mode;

• There are many different types of grips for selection;

• Optional CAN bus output.

Application

This series of products are mainly used in heavy equipment, like cranes, loaders, forklifts, excavators, aerial work platforms, tractors, harvesters, etc.

Grip Multi-axis Operation joystick used in heavy equipment

Technical information

Electrical parameters

Hall type

Power supply voltage	5 ± 0.5Vdc
Power supply current (rated power supply current)	<11mA (single axis) 22mA (dual axis)
Limit allowable over voltage	20Vdc
Reverse limit allowable voltage	-10Vdc
Linear error of output voltage	<± 0.2V

Mechanical parameters

Rocking angle	± 20 °
Mode of operation	Automatic spring return
Starting force	20N
Maximum operating force	11N
Limiting force	> 300N
Service life	> 2 million times
Weight	About 660g

Environmental parameters

Working temperature	-30C ~ + 70 ℃
Storage temperature	-40 ℃ ~ + 85 ℃
Protection grade	IP65 (above the installation panel)

Product configuration

HJ89 series

Operation method

1A	Single-axis front-back operation
2AC	Any operation direction of two axis

Input voltage

S	5Vdc (standard voltage)
W	9 ~ 36Vdc (wide voltage)

Output signal

Hall type (supply voltage 5VDC)

H51	Single Hall, 0.5 ~ 2.5 ~ 4.5Vdc voltage output
H52	Single Hall, 0 ~ 2.5 ~ 5Vdc voltage output
H53	Single Hall, 1.25 ~ 2.5 ~ 3.75Vdc voltage output
J33	CAN 2.0B bus output, source address is 33, J1939 protocol
J34	CAN 2.0B bus output, source address is 34, J1939 protocol